Solar Water Heater
FPC - Flat Plate Collector Solar Water Heater
The main use of this technology is in residential, commercial and residential buildings where the demand for hot water has a large impact on energy bills. Using hot water for bathing and washing purpose is both hygienic and helps in eliminating germs and bacteria. It also helps is soothing the muscles thereby improving the blood flow. It also helps in the prevention of Legionella Virus which can cause respiratory diseases. Therefore a hot water bath is both rejuvenating and therapeutic. A Flat Plate Collector is a heat exchanger that converts the radiant solar energy from the sun into heat energy using the well known greenhouse effect. It collects, or captures solar energy and uses that energy to heat water in the home for bathing, washing and heating.
Technical specifications
Technical Details
Capacity of tanks 100LPD
Type Non pressurized system
Inner tank material 1.2mm SS304, Galvanized Steel or CRCA
Insulation PUF 50mm
Outer cladding Pre painted Galvanized steel (PPGI) or SS (stainless steel)
Back up heater 2kw with thermostat control 230v Ac(optional)
Tank supports MS powder coated angle
Tank testing Factory pressure tested for normal systems is at 1 kg/cm²
Number of collector 1 No’s
Absorber material Copper absorber
Coating material Copper, selectively coated with Nalsun black chrome
Coating
Area required N-S = 3.5 m , E-W=1.2 m
Technical Details
Capacity of tanks 200LPD
Type Non pressurized system
Inner tank material 1.2mm SS304, Galvanized Steel or CRCA
Insulation PUF 50mm
Outer cladding Pre painted Galvanized steel (PPGI) or SS (stainless steel)
Back up heater 2kw with thermostat control 230v Ac(optional)
Tank supports MS powder coated angle
Tank testing Factory pressure tested for normal systems is at 1 kg/cm²
Number of collector 2 No’s
Absorber material Copper absorber
Coating material Copper, selectively coated with Nalsun black chrome coating
Area required N-S = 4 m , E-W=2.5 m
Technical Details
Capacity of tanks 300LPD
Type Non pressurized system
Inner tank material 1.2mm SS304, Galvanized Steel or CRCA
Insulation PUF 50mm
Outer cladding Pre painted Galvanized steel (PPGI) or SS (stainless steel)
Back up heater 2kw with thermostat control 230v Ac(optional)
Tank supports MS powder coated angle
Tank testing Factory pressure tested for normal systems is at 1 kg/cm²
Number of collector 3 No’s
Absorber material Copper absorber
Coating material Copper, selectively coated with Nalsun black chrome coating
Area required N-S = 4.3 m , E-W=3.5 m
Technical Details
Capacity of tanks 500LPD
Type Non pressurized system
Inner tank material 1.2mm SS304, Galvanized Steel or CRCA
Insulation PUF 50mm
Outer cladding Pre painted Galvanized steel (PPGI) or SS (stainless steel)
Back up heater 2kw x 2 no’s with thermostat control 230v Ac – 2 No’s (Optional)
Tank supports MS powder coated angle
Tank testing Factory pressure tested for normal systems is at 1 kg/cm²
Number of collector 4 No’s
Absorber material Copper absorber
Coating material Copper, selectively coated with Nalsun black chrome coating
Area required N-S = 5 m , E-W=4.6 m
Technical Details – Pressurized System
Capacity of tanks 100LPD
Type Pressurized system
Inner tank material 3mm SS304, Galvanized Steel or CRCA
Insulation PUF 50mm
Outer cladding Pre painted Galvanized steel (PPGI) or SS (stainless steel)
Back up heater 2kw with thermostat control 230v Ac(optional)
Tank supports MS powder coated angle
Tank testing Factory pressure tested for normal systems is at 3 kg/cm²
Number of collector 1 No’s
Absorber material Copper absorber
Coating material Copper, selectively coated with Nalsun black chrome
Coating
Area required N-S = 3.5 m, E-W=1.3 m
Technical Details
Capacity of tanks 200LPD
Type Pressurized system
Inner tank material 3mm SS304, Galvanized Steel or CRCA
Insulation PUF 50mm
Outer cladding Pre painted Galvanized Iron (PPGI) or SS (stainless steel)
Back up heater 2kw with thermostat control 230v Ac(optional)
Tank supports MS powder coated angle
Tank testing Factory pressure tested for normal systems is at 3 kg/cm²
Number of collector 2 No’s
Absorber material Copper absorber
Coating material Copper, selectively coated with Nalsun black chrome coating
Area required N-S = 4 m , E-W=2.5 m
Technical Details
Capacity of tanks 300LPD
Type Pressurized system
Inner tank material 3mm SS304, Galvanized Steel or CRCA
Insulation PUF 50mm
Outer cladding Pre painted Galvanized Steel (PPGI) or SS (stainless steel)
Back up heater 2kw with thermostat control 230v Ac(optional)
Tank supports MS powder coated angle
Tank testing Factory pressure tested for normal systems is at 3 kg/cm²
Number of collector 3 No’s
Absorber material Copper absorber
Coating material Copper, selectively coated with Nalsun black chrome coating
Area required N-S = 4.5 m , E-W=3.5 m
Technical Details
Capacity of tanks 500LPD
Type Pressurized system
Inner tank material 3mm SS304, Galvanized Steel or CRCA
Insulation PUF 50mm
Outer cladding Pre painted Galvanized Steel (PPGI) or SS (stainless steel)
Back up heater 2kw x 2 no’s with thermostat control 230v Ac – 2 No’s (Optional)
Tank supports MS powder coated angle
Tank testing Factory pressure tested for normal systems is at 3kg/cm²
Number of collector 4 No’s
Absorber material Copper absorber
Coating material Copper, selectively coated with Nalsun black chrome coating
Area required N-S = 4 m, E-W=4.7 m
ETC - Evacuated Tube Collector Solar Water Heater
ETC Solar Water Heaters Systems comes with three-layered evacuated glass tubes that provide insulation and outer wall is coated with high-grade absorption material. By these, the tubes absorb the maximum sunlight even in the cloudy season, results in continuous hot water for your home.
Power Tek ETC solar water systems can be a cost-effective way to get continuous hot water for your home. ETC water heaters come with the advanced technology of three-layered evacuated glass tubes that provides the insulation and the outer wall is coated with high-grade absorption material. This arrangement helps to absorb the maximum sunlight to keep water warm for any weather conditions.
BENEFITS:
- Save up to 70% on your Electricity Bill
- Eco Friendly
- Low Maintenance
- Scale Guard for hard water
- Extended life of more than 20 years
- One time Investment,Life long Benefit
Technical specifications
Vacuum Tube outer diameter: 58 mm.
Vacuum Tube inner diameter: 48 mm.
Tube Length : 1800 mm
Outer tank Diameter : 480 mm.
Inner tank Diameter : 380 mm.
Tank Volume : 100 liters to 500 liters
Temperature : 65 degree C to 85 degree C.
Tank Insulation : PUF 50mm (Polyurethane foaming)
Stand frame : Mild steel Powder coated
Inner Tank Material : Available in- SS304, SS316, Galvanized steel, CRCA, & COPPER with Non-stick coating for long life of inner tank.
Outer Tank Material : Galvanized Pre-coated & SS
Type of Fasteners : Stainless Steel / galvanized
Type of Grommets : Silicon rubbers.
Type of Circulation : Thermo siphon
Electrical Back Up : 1.5OR 2KW each (optional) Not Suggested.
Type of inlet feeding : Using gravity feeding tank for non pressure,
No of tubes for various capacities is as under:
CAPACITY | 58 mm |
100 LPD | 10 |
150 LPD | 15 |
200 LPD | 20 |
250 LPD | 25 |
300 LPD | 30 |
500 LPD | 34T 58/2100mm |
Solar Street Light
All in one solar street light manufactures in Bangalore India. An all in one solar street light is a hassle free lighting solar solution with no cabling requirement. Our all in one solar street light has an easy to mount structure with top solar panel which has a lithium (LifePO4) battery, infrared motion sensor, control card and high output LEDs encased into it. Our all in one solar street light is a state-of-the-art product with more than 15 features in cased into a single enclosure. Some of our all in one solar street light features are:
- Uni-body light weight design. Modern and smart appearance. Patented die-casted panel housing. Zinc plated anti rust and anti-corrosion coating. Waterproof design makes sure no maintenance is needed. Automated dusk to dawn operation. Super-fast 6-8 hour charge, which lasts for 3-5 rainy days. In-built infrared motion sensor with smart functioning. Government approved, completely made in India with a 5-year warranty. Easy to install and use, DIY design.
Power tek Solar Systems is all in one solar street light is an innovative modern and smart all in one solar street light for your lighting needs. Our all in one solar street light range is available from as less as 7W to 50W.
Solar Lanterns
We offer Solar Lanterns and Lamps. A lantern is a portable lighting device used to illuminate broad areas. Lanterns may also be used for signaling, to guide your path somewhere or as general light sources for camping.
Solar lamps for use in rural situations often have the capability of providing a supply of electricity for other devices, such as for charging cell phones. American investors have been working towards developing a RS. 10 / unit solar lantern for replacement of kerosene lamps
Best Solar Water Heater in Bangalore
Looking for the best solar water heater in Bangalore? Power Tek Solar manufactures durable ETC & FPC Solar Water Heaters with expert installation and reliable support for residential and commercial applications.
Request a free quote
Please Feel Free to Call Us
Power tek Solar Systems India’s leading and most trusted water heater manufacturing company.